2. IP ADDRESS G.W. (for Interface VLAN = Client1)
Router(config-bridge)# exit
Router(config)# interface Client1
Router(config-if)# ip address 192.168.1.4/30
Router(config-if)# show ip
50: Client1: <RUNNING,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
    link/ether 00:d0:cb:09:05:46 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.4/30 brd 192.168.1.5 scope global Client1