Praktek ADSL Subscriber Configuration Tasks Command Line Interface Create a service VLAN DSL# add-vlan 100 DSL# add-vlan 101 DSL# add-vlan 102 DSL# add-vlan 103 DSL# add-vlan 104 membuat 5 VLAN untuk 5 subs port Add the subscriber port to the VLAN without tagging DSL#vlan 100 1/1 untag DSL#vlan 101 1/2 untag DSL#vlan 102 1/3 untag DSL#vlan 103 1/4 untag DSL#vlan 104 1/5 untag Pelanggan dibuat pada board untuk ADSL2+ (ASIGN) Set the subscriber port as the VLAN ID DSL#interface adsl-mpvc 1/1 DSL# pvid 100 pvc1 DSL#exit DSL#interface adsl-mpvc 1/2 DSL# pvid 101 pvc1 DSL#exit DSL#interface adsl-mpvc 1/3 DSL# pvid 102 pvc1 DSL#exit DSL#interface adsl-mpvc 1/4 DSL# pvid 103 pvc1 DSL#exit DSL#interface adsl-mpvc 1/5 DSL# pvid 104 pvc1 DSL#exit Mpvc = ASIGN (ADSL2+/ADSL2/ADSL board) Pvc1=kanal ATM Add the uplink port to the VLAN an Tag it DSL# vlan 100 15/1 tag DSL# vlan 101 15/1 tag DSL# vlan 102 15/1 tag DSL# vlan 103 15/1 tag DSL# vlan 104 15/1 tag Slot 15 port 1 pada uplink (EICG board) digunakan untuk untuk tagging (optional) Set the ADSL line parameter set and the alarm parameter set as required by the office party DSL# adsl-profile siswa384 Menbuat profile untuk menentukan speed upstream dan down stream (di opeasional profile ini sudah dibuat sebelumnya) Set ADSL line parameter and alarm parameter to ADSL subscriber DSL# interface adsl 1/1 DSL#adsl profile siswa384 DSL# exit DSL# interface adsl 1/2 DSL#adsl profile siswa384 DSL# exit DSL# interface adsl 1/3 DSL#adsl profile siswa384 DSL# exit DSL# interface adsl 1/4 DSL#adsl profile siswa384 DSL# exit DSL# interface adsl 1/5 DSL#adsl profile siswa384 DSL# exit Menberikan profile ke setiap pelanggan ADSL Configure the subscriber port with PVC, which is corresponding to the PVC of modem DSL# slot adsl 1 DSL# atm pvc 8:81 Memberikan harga PVC ke Slot 1 Save the configuration DSL# copy running-config startup-config Are you sure to save configuration data ? [y/n] y Save finished successfully Menyimpan konfigurasi dari memory ke flash